How To Clean Fan Of Acer Predator Laptop
Acer Predator Helios 300: Resolving Heating Issue by Cleaning Fan Vent and Changing Thermal Paste
Recently, my Acer Predator Helios 300 laptop had a heating effect. Its CPU temperature reached 97°C during gaming and 60°C during normal usage such as web browsing.
To accost this, I googled for solutions.
The offset thing that came into my sight is thermal paste change. Later on further research, I decided to replace the thermal paste past myself and test the effectiveness of this approach.
I followed this video to alter the thermal paste of my laptop. The supplies I used are thermal paste remover, surface purifier and thermal paste. The tools I used are screwdrivers, spudgers, cotton swabs, and a lint-free cloth.
Later on changing the paste, I was going to exercise a booting test. I did not insert the screws dorsum into the back panel so I could do additional work easily subsequently if needed.
I pressed the power button.
Nothing happened.
Orz.
I plugged in the A/C adapter and tried to power information technology up once again.
Thank God this fourth dimension it worked.
After several trials, I assured that the laptop could only rely on the A/C adapter to power upward. It seems foreign as the battery could exist detected in my operating system but could not provide power to the laptop.
I googled and applied some possible solutions such as resetting the bombardment, but neither of them worked.
Then, I found this solution.
It said that installing the back console screws may solve the upshot, every bit some laptops use a airtight loop formed past motherboard, dorsum panel and screws to determine whether to cut off bombardment ability supply.
Therefore, I installed them back to the laptop, and guess what?
This is exactly the solution I was looking for! Hooray!
I then started to test the effect of my thermal paste change by running a video game named Overwatch that caused 30% CPU and 35% GPU load.
On average, the thermal paste change gave me a x°C temperature drop on both CPU (97 → 87°C) and GPU (90 → 80°C).
Even so, I was non satisfied with this result. I reviewed the video to see what I had missed. It turned out that I did not clean the interior side of the fan vent.
I followed the video to make clean the fan vent and there WAS a lot of dust stuck at the interior side. After cleaning, I replaced the thermal paste again to prevent potential bubbling in the paste.
This fourth dimension, the fan vent cleaning gave me approximately a further 20°C temperature decrease on both CPU (87 → lxx°C) and GPU (80 → 60°C).
It is obvious that the dust accumulated at the fan vent, which blocked air apportionment and drastically reduced the fan efficiency, is the bottle cervix of reducing CPU/GPU temperatures.
Next fourth dimension when the CPU/GPU temperature goes high, it's probably a practiced idea to check the fan vent showtime to make certain the fan efficiency is decent, and then consider a thermal paste change.
That'south my story about solving heating issues of an Acer Predator Helios 300 laptop.
Promise you find information technology helpful.
Source: https://medium.com/@teyuanliu/acer-predator-helios-300-resolving-heating-issue-by-cleaning-fan-vent-and-changing-thermal-paste-85308bd9a0ab
Posted by: clydehologe.blogspot.com
0 Response to "How To Clean Fan Of Acer Predator Laptop"
Post a Comment